ph.  904.291.9307
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!


Metal Building Roof Curbs


Floating Curb -
Classic Roof™ and CFR™ Panels

Floating curbs are available for use on a standing seam roof with roof top units weighing less than 300 pounds total weight and on a classic roof with roof top units weighing less than 1,200 pounds total weight.

Roof Curb
The floating curb is attached to the roof using self-drilling screws at 4” on center around the perimeter of the curb through the center of 2 ½” tape mastic. The opening sizes will vary based upon the model and size of the unit selected for your building. The roof top unit manufacturer and model number will be used when ordering the curbs and are required at the time the order is placed. Installation of the curb is recommended during the roof panel installation. These curbs are available unpainted only. They may be field painted to match the roof color if desired.

Floating Structural Curb - For CFR Panels Only

The floating structural curb is available for use on a standing seam roof only with roof top units weighing greater than 300 pounds and less than 6,000 pounds total weight. The structural curb is attached to sub-framing below the roof sheeting. The opening sizes will vary based upon the model and size of the unit selected for your building. The roof top unit manufacturer and model number will be used when ordering the curbs and are required at the time the order is placed. Installation of the curb is recommended during the roof panel installation. These curbs are available unpainted only. They may be field painted to match the roof color if desired.

For detailed information, refer to the Product Manual: